Charge Your Robovac; Use Your Robovac With The Eufyhome App - EUFY RoboVac G20 Hybrid Gebrauchsanweisung

5
Place the Charging Base on a level surface and against a wall.
6 Remove objects within 3 ft / 1 m of the left and right side and within 6 ft / 2 m of
the front of the Charging Base. If you cannot remove the objects, move RoboVac
to a new place and check whether RoboVac can return to the Charging Base
normally; if not, contact eufy customer service for help.
7 Connect the adapter to the Charging Base and a wall outlet.
- When the Charging Base connects to AC power, the LED indicator on the
Charging Base is SOLID WHITE.
• Install the Charging Base in a location that RoboVac can easily access. It is
recommended to place the Charging Base against a wall, and on a hard-level
surface rather than on rugs or carpets.
• Always keep the Charging Base plugged in, otherwise RoboVac will not
automatically return to it.
14 EN

Charge Your RoboVac

• Make sure RoboVac is fully charged before use.
• RoboVac will return to the Charging Base at the end of a cleaning cycle or
when its battery is running low.
Attach RoboVac to the Charging Base by aligning its charging pins with the charging
pins on the base.
• Turn off the main power switch if RoboVac will not be used for a long
period of time. To preserve the battery's lifespan, recharge at least once
every 6 months.

Use Your RoboVac with the EufyHome App

To enjoy all available features, it is recommended to control your RoboVac via the
EufyHome app.
Before you start, make sure that:
• Your smartphone or tablet is connected to a Wi-Fi network.
• Your smartphone or tablet is running iOS 10.0 (or above) or Android 5.0 (or above).
• The 2.4GHz band wireless signal is enabled on your wireless router.
• The Wi-Fi status light on RoboVac is slowly flashing blue.
• RoboVac is attached to the Charging Base to ensure it has enough power during
setup.
EN 15