Controlling Up, Down, My: In Roller Mode - SOMFY Roll Up 28 WF RTS II Anleitung

EN
This feature allows the drive to be set according to the type of application.
NOTICE
The drive is set (by default) to work in Roller mode.
1] Move the motorised product away from
the end limits.
2] Simultaneously press and hold the Up and
Down buttons until the motorised
product briefly moves up and down.
3] Press and hold the my and Down buttons
simultaneously
product briefly moves up and down to
change from Roller mode to Tilting mode.
g Green LED blinks twice to indicate that
the drive is in Roller mode or three
times to indicate that the motor is in
Tilting mode.

3.2.Controlling Up, Down, my: in Roller mode

1] To move the motorised product from a
limit to the other limit, briefly press the Up
or Down button.
2] To stop the motorised product, briefly
press the my button.
3] If a favourite position (my) is recorded: To
move the motorised product to the
favourite position (my), briefly press the
my button.
14
until the motorised
©
Copyright 2021 SOMFY ACTIVITES SA. All rights reserved.
Roll Up 28 WF RTS II
1]
2] 3]
1]
2] 3]