Memorize Scenes; Memorize Chasers - EuroLite DMX Commander Bedienungsanleitung

Memorize scenes

With the DMX Commander you can memorize up to 36 different scenes with 48 channels on the 12
Playback-faders (Page 1 to Page 3).
Press the Program-button, until the Program-LED is lit.
Push the Masterfader to maximum.
Push channel-faders to the desired setting.
Press the Program-button.
Select the desired bank via the respective Scene-button and press the desired Flash-button in the Playback-
section. All LEDs shortly flash.
The scene is now memorized on this fader.
Call up scenes
Select the desired bank via the respective Scene-button.
Push the Masterfader to maximum.
Push the Playback-fader of the desired scene to maximum.
The scene will be called up.

Memorize chasers

With the DMX Commander you can memorize up to 48 different chasers with 48 channels on the 12
Playback-faders (Page 1 to Page 4).
Press the Program-button, until the Program-LED is lit.
Push the Masterfader to maximum.
Push channel-faders to the desired setting.
Select the desired bank via the respective Chase-button and press the desired Flash-button in the Playback-
section. Press the Program-button. The chaser is now memorized on this fader.
Press the Program-button in order to memorize the first step. All LEDs shortly flash.
Push channel-faders to the desired setting for editing the next step and press the Program-button.
Memorize as many steps as desired or until the maximum (200 steps) is reached.
Press and hold the Program-button in order to leave the programming mode.
Call up chasers
Select the desired bank via the respective Chase-button.
Push the Masterfader to maximum.
Push the Playback-fader of the desired chaser to maximum.
The chaser will be called up.
Run a chaser
Select the desired Run Mode via the Run Mode-button.
In the Music Mode, you can adjust the audio sensitivity with the Up/Down-buttons.
In the Manual Mode, you can switch from scene to scene with the Up/Down-buttons.
In Auto Mode:
Adjust the desired fade-time via the Fade-Fader.
Adjust the desired chaser-speed via the Wait Time-Fader.
If the chaser is to be run sound-controlled, press the Run Mode-button until the Music-LED is lit.
If the chaser is to be run exactly in the bass-beat, pull Wait Time-Fader to minimum and enter the bass-beats
by pressing the Tap/Del-button repeatedly.
Memorize/edit chaser-speed
With the DMX Commander, you can run several chasers at a time and define and memorize an individual
chaser-speed for every chaser.
17/20 00065864.DOC, Version 1.0