User Codes - Waeco AirCon Service ASC 6100G Bedienungsanleitung

English
• Filling with UV additive
• Filling of refrigerant
After each process has been performed a service report is printed. Subsequent actions are only initiated once the
preceding action has been completed successfully.
1. Fit the service hoses for the A/C service unit to the vehicle air conditioning system, and open the service
couplings.
2.
Press the cursor key
3.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
4. Press ENTER to confirm.
5.
Use the keypad and the cursor keys to enter the vehicle data.
6. Press ENTER to confirm.
7.
Enter the refrigerant filling quantity. Use the value shown on the filling quantities sticker in the vehicle and
enter it using the keypad and the cursor keys and press ENTER.
8.
Use the cursor keys
sure and low pressure) or only one connection (high pressure or low pressure).
HP/LP
HP
LP
ENTER-OK STOP-EXIT
9. Press ENTER to confirm.
The fully automatic air conditioning service is started.
After the air conditioning service has finished, you will be prompted to disconnect the A/C service unit's ser-
vice hoses of from the vehicle air conditioning system.
10. Disconnect the service hoses and press ENTER to confirm.
The service hoses will now be drained. The A/C service unit is then ready for further use.
11. Put the valve caps of the vehicle air conditioning system back on the connections.
13.3

User Codes

It is possible to protect the A/C service unit from unauthorised access using personal user codes. When this func-
tion is activated, the system queries the user code after being switched on, and the A/C service unit cannot be
started without it. Up to 10 different users can be created with individual codes. Users can be created using the
administrator code.
13.3.1 Creating user codes
1.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3.
Use the cursor key
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
14
or to acces the basic menu.
or to select Short selection.
or to select whether the air conditioning system has two connections (high pres-
PORT
PORT
PORT
or to select Other selections.
to select Service and press ENTER to confirm.