Tesla SMART SENSOR BUTTON Benutzerhandbuch Seite 4

2.Press the reset button for 5S and release, the red
LED will flash f or network setting.
Use a pin to press the button for 5s.
Network Setting Note:
Press the reset button for 5s-10s, the red LED is on
for 5s then turns off, release the reset button for
network setting. During network setting, LED keeps
on flashing for 20s. If pressing for more than 10s,
network setting cancelled
The red LED will be on for 5s to indicate network
setting succeeds. If fails, the red LED is off.
4