Possible Cause - Seecode 20288 Bedienungsanleitung

To clean watch straps and jewellery items
Cleaning watch straps:
You can use the watch rest to clean metal watch bands. Place the watch band on the tray with the
watch side up and place the tray in the container filled with water. Make sure that the watch case is
not in the water.
Cleaning jewellery:
First place the jewellery in the basket and then place the basket in the container filled with water.
After cleaning, remove the basket and dry the jewellery carefully with a clean, dry cloth.
Maintenance
Do not clean the ultrasonic cleaner with harsh detergents or sharp objects. 2.
Store the unit in a cool, dry place out of the reach of children. 3.
Do not leave water in the cleaning tank. Empty it immediately after each use.
Only wipe the cleaning container with a dry cloth. Please do not clean the entire appliance with
water.
Troubleshooting
Problem / Fault
The unit does not start when
the „START/STOP" button is
pressed.
The object to be cleaned is
still dirty.
10

Possible cause

The unit does not get
power, please check the fit
of the plug.
The mains cable is dama-
ged.
There is no or too little
water in the container.
No cleaning agent has
been added in case of
heavy soiling.
Remedy
Please check the fit of
the plug in the socket.
Have the unit repaired
by a qualified technician.
Fill water into the contai-
ner until the „MAX" mark
is reached.
Add a little detergent, e.g.
dishwashing detergent, to
the water depending on
how dirty it is.