Optionen; Option 'Shadecover - Fronius Symo 10.0-3 208-240 Installationsanleitung

Optionen

Optionen
OPTION ‚Shade-
Cover'
HINWEIS!
A DIN rail is provided in order to
mount accessory electrical devices in-
cluding, but not limited to, overcur-
rent protection, metering, radio or cel-
lular modem.
Maximum size for mounting of all de-
vices is 4w x 4,75l x 2,59 inches. The
installer takes responsibility for any
undesired effect on the inverter by in-
stalling an electrical device in this
area, caution should be taken when in-
stalling a device that may output signi-
ficant amounts of heat or radio inter-
ference. Always insure that the device
does not inhibit the inverter from clo-
sing and sealing properly. Any questi-
ons about device eligibility should be
directed toward technical support.
- Use the ShadeCover when the in-
verter is exposed to direct sunlight
- Use 4 screws for proper mounting
NO MOUNTING
67