Now connect the microphone (connection 4) and the monitor plug (connection 5) to the
electronics box.
The hands-free car kit reproduces the interlocutor's voice output during a phone conversation
via connection 3. You can connect a separate loudspeaker (Bury accessories) or the phone-in
input of your radio (if available) to this connection via a phone-in adapter (Bury accessories).
The connection of a loudspeaker switch box (Bury accessories) is also possible. The two latter
models use the vehicle's sound system for voice output.
Stereo music is output at connection 2. Here you can connect the aux-in input of your radio (if
existent) via adapters available at local retailers. For the connection to the hands-free car kit,
the adapter must have a 3.5 mm stereo jack. Depending on the car radio, the other end must be
selected otherwise. If your radio does not have an aux-in, you can use the car CD adapter from
the Bury accessories programme to enable the reproduction of music via your radio.
1
2
3 4
5
36
33