EuroLite LED-TMH-S180 Bedienungsanleitung Seite 30

Invert PAN
With this function you can reverse the PAN-movement.
Invert TILT
With this function you can reverse the TILT-movement.
PAN-TILT-Swap
With this function you can swap PAN and TILT.
Encoder PAN-TILT / automatic PAN/TILT correction (Feedback)
With this function you can correct the PAN/TILT movement to the programmed position.
No DMX signal / action if no DMX
With the function you can "keep" or "clear" the DMX value if there is no DMX-signal.
Display power save / display turn off
With this function, you can adjust the display characteristics when the buttons are inactive:
ON - Shuts off the display after 30 seconds
OFF - Display always on.
Load default
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded).
Manu
Manual control
With this function, you can adjust each channel manually.
Sys
Ver
With this function you can display the software version of the device.
DMX Monitor
With this function you can display the current DMX addresses of the channels.
System errors
With this function you can display error messages.
Total fixture hours
With this function, you can display the running time of the device.
Partial fixture hours
With this function, you can display the temporary running time of the device from the last power on.
180° / display reverse
With this function, you can flip the display by 180° for a better view when the fixture is hung from the truss or
a ceiling.
°C / Show temperature
With this function, you can display the temperature in the projector-head.
Display language select
With this function, you can select the desired display language (English or Chinese).
30/36 00138072, Version 1.0