Balluff BNI EIP-508-105-Z067 Konfigurationsanleitung Seite 84

BNI EIP-508-105-Z067
Network interface
6
WebUI/web interface (continued)
The c
iO-l
Onnected inK deviceS
form of a list of currently connected IO-Link devices as well
as the associated, required IODD file name (column iOdd
f ).
ilenaMe
To avoid manual renaming of the associated image
files, we recommend uploading ZIP files with the
IODD content.
Firmware
Under f you can see which version of the firmware
irMware
is being used and when it was uploaded. Via f
u , you can upload a different firmware version. Only
plOad
files in BWF format are supported.
Fig. 6-37: Firmware view
Output test
Via the O dialog, every output pin can be tested
utput teSt
online. To set the output to either 0 or 1, the respective pin
must be configured first as a d
p dialog. At a physical port, a maximum of 2 pins can
OrtS
be configured accordingly, depending on the variant. This
can either be confirmed via i/O p
cOnfiguratiOn fOr all pOrtS
or can be done individually. In the following example
illustration, some available pins are configured as digital
outputs:
40 english
bar also displays help in the
irMware
O via the i/O
igital utput
> S
OrtS et Specified
: > d > S > S
igital Out et all et all
Fig. 6-38: Output test (example)