Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Measurement method
4.1. pH measurement
After calibrating the measuring device and the pH electrode, the device is
ready for measurement.
1.)
Connect the electrode to the BNC connector of the device.
2.)
Remove the protective cap from the electrode.
3.)
Switch the measuring device on by pressing the ON / OFF button.
4.)
Immerse the pH electrode in the solution to be measured.
5.)
Slowly stir the electrode in the solution until you get a stable reading.
6.)
After you have taken a measurement, rinse the electrode with distilled
water!
7.)
Put the protective cap back on the electrode.
12
Werbung
Inhaltsverzeichnis
