Victron energy MultiPlus Anleitung Seite 8

Charger
mains on
on
Bulk
off
absorption
charger
only
Float
Charger
mains on
on
Bulk
off
absorption
charger
only
Float
Charger
mains on
on
Bulk
off
absorption
charger
only
Float
Battery Charger
Charger
mains on
on
Bulk
off
absorption
charger
only
Float
Charger
mains on
on
Bulk
off
absorption
charger
only
Float
Charger
mains on
on
Bulk
off
absorption
charger
only
Float
8
inverter
inverter on
The inverter has switched off due to
overload
the electronics temperature being
too high.
low battery
temperature
inverter
inverter on
-If the LEDs are flashing alternately,
the battery is nearly exhausted and
overload
the nominal output is exceeded.
-If "overload" and "low battery" flash
simultaneously, the ripple voltage
low battery
on the battery terminals is too high.
temperature
inverter
inverter on
The inverter switched off due to
overload
excess ripple voltage on the battery
terminals.
low battery
temperature
inverter
inverter on
The AC input voltage is switched
overload
through and the charger operates in
bulk mode.
low battery
temperature
inverter
inverter on
The mains voltage is switched
through and the charger is on.
overload
The set absorption voltage,
however, has not yet been reached.
low battery
(BatterySafe mode)
temperature
inverter
inverter on
The mains voltage is switched
overload
through and the charger operates in
absorption mode.
low battery
temperature