Operation; Operating Manual Blinds - Dometic SKYSOL CLASSIC Montage- Und Bedienungsanleitung

Operation

Key to wiring diagrams
Pos. Description
1 Regulated 12 V DC/24 V DC power supply (fuse rating 2 A for 24 V DC, 1 A
for 12 V DC)
2 Head rail
3 Head rail motor options
4 External receiver
5 Customer supplied DPDT switch (double pole, double throw), center off,
latching or momentary, 12/24 V DC, 3 A
bk black
rd red
gy gray
wh white
I
NOTE
• Accessories are available using the separate order form.
• Observe the applicable documents for the controls and the operat-
ing elements.
8 Operation
!
CAUTION! Risk of injury
Only for boats and yachts: If the blind is in front of an open window,
then the blind should be stowed when driving at more than 10 knots or
in a sea state of more than moderate, as this can cause damage to the
blind. Parts that come loose may injure persons in the vicinity.
8.1

Operating manual blinds

The blind can be moved to any position by the handle.
➤ Proceed as shown to operate the manual blind.
28
Skysol Classic & Honeycomb
EN