FS ENTERPRISE AP-T565 Schnellstartanleitung Seite 15

Quick Connect
Protocol:
The port may be manually entered or selected from the list.
Port:
Baud rate:
Data bits:
Parity:
Stop bits:
Name of pipe:
Show quick connect on startup
Step 4: After setting the parameters, click "Connect" to enter. And then enter the password("admin" by
default).
NOTE: For more details, please refer to the Configuration Guide on the website.
Serial
Flow Control
COM3
DTR/DSR
9600
RTS/CTS
8
XON/XOFF
None
1
Save session
Open in a tab
Connect
Cancel
x
14