Contacts
You can save phone numbers and their corresponding names in the
memory of your SIM card. In addition, you can save up to 200 numbers
and names in the phone memory.
Press the left soft key [Menu] in standby mode, then select
]
Contacts.
Or, press the right soft key [Contacts] in standby mode.
]
Search
1. In standby mode, press the right soft key [Contacts]. Select Search. You
are asked to enter a name.
2. Enter the start of the name that you wish to find and press
left soft key [Search].
Note
You can also scroll through the Contacts from the beginning, by
pressing the left soft key [List] directly.
You can access the Contacts directly by pressing the up navigation key
]
(
) in standby mode.
3. After finding the desired contact, you can make a call to the number by
pressing the
key. Or press the left soft key [Option] to use the
following options.
• Edit: You can edit the name and number.
• Write text message: Use this to write a text message to the contact.
• Write multimedia message: Use this to write a multimedia message to
the contact.
• Copy: Use this to copy the contact entry from SIM to the phone memory
or vice versa.
• Main number: Select which number will be the main number. The main
number will be displayed first
• Delete: Deletes the contact.
C1200 User Guide
Menu-
-1
66
Contacts
Add new
You can add a contact entry using this function.
There are 2 memories: Phone memory and SIM memory. To select
the memory, go to Set memory [Menu
memory capacity is 200 entries. You can enter up to 20 characters
in each name in the phone memory. The SIM card memory capacity
depends on the SIM card.
1. Open the Contacts first by pressing the right soft key [Contacts]
in standby mode.
2. Scroll to highlight Add new, and press [Select]
3. You can add new contact entries to the SIM memory or the
phone memory. To select the memory, go to Set memory [Menu
-5-1]. (Refer to page 68.)
• Adding new entries into SIM memory
You can enter a name and number, and select the required group.
(Depends on the SIM)
• Adding new entries into the phone memory
You can enter a name, numbers, E-mail address and memo, and
select the required group. And select which number will be the
main number.
Caller groups
You can list up to 20 contacts per group. There are 7 pre-defined
groups, where you can create lists.
1. Select Caller groups. All group lists will be displayed: Family,
Friends, Colleague, VIP, Group 1, Group 2, and Others.
2. Select the group name that you want to manage by pressing the
left soft key [Option]. The following submenus will be displayed.
• Member list: Displays the member list in the group.
• Group ringtone: Use this to select the ring tone to be used when
you receive a voice phone call from a person in the group.
C1200 User Guide
Menu-
-2
-5-1]. The phone
Menu-
-3
67