Nexigo PJ10 Bedienungsanleitung Seite 23

Multi-media
Picture Setting
Projection
Mode
System Setting
OSD
Language
OSD Language:
Software Update:
1. Please check
2. Download the latest firmware to a USB flash drive, and then insert
the flash drive into a USB port on the projector.
3. In the on-screen menu select
Update.
4. The software will be updated automatically, do not try to use the
projector until the update is completed.
Note: All current shipments on the market come with the latest
firmware, you don't have to update it. The projector will be reset after
the software updates, all saved settings will be erased.
Restore Factory Settings:
Auto Sleep: Allows you to set a timer to turn the projector power off
automatically.
Input Source
Image
Scaling
Software
Factory Default
Update
Choose the language used in the projector menus.
Update the software version on the projector.
nexigo.com periodically for new firmware downloads.
Reset the projector to factory default.
Aspect Picture
Ratio Mode
Restore Auto
Sleep
Setting > System Setting > Software
Setting
Color
Range
US 22