Beem PYRAMID Bedienungsanleitung Seite 31

31
For descaling we recommend the BEEM Premium Descaler Concentrate. The efficient and food-safe
BEEM Premium Descaler Concentrate is available from selected specialist stockists, via our website
www.beem.de or from our customer service department on request.
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the water reservoir (7) up to the MAX marking (14) with a concentrate / water solution
of no more than 1:20 (one part concentrate to 20 parts water).
2. Turn the thermostat control (9) clockwise to the
start boiling the water. The heating control lamp
3. As soon as the solution comes to a boil, turn the thermostat control anticlockwise until the
heating control lamp
solution take effect for a little while.
4. Allow the solution to run through the discharge tap (12) so that it is also freed of any lime-
scale residues (see the "Operation" chapter – "Operating the Discharge Tap").
5. To rinse the device, allow two tankfuls of clear water to run through it. The device is now
descaled and ready to be used again.
Storage
Disconnect the device from the mains power when it is not going to be used for a prolonged
period. Clean the device again (see the "Cleaning and Care" chapter) to avoid possible mould
formation. Mould can cause spots and damage on the device that can no longer be removed /
repaired. Allow the device and all accessories to dry completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from direct
sunlight and cannot be accessed by children or animals.
goes out (see the "Preparation" chapter – "Interval Boiling"). Let the
position to switch on the device and
(11) lights up.
EN