Wacom cintiq Schnellstartanleitung Seite 7

Setting up the Cintiq for Desktop mode
1. After Mobile Mode setup, the Cintiq will automatically switch into Desktop
mode.
2. A virtual CD,
"Startup" (Windows) or "Install Tablet
to install the driver and software.
If nothing is displayed
1. Disconnect 3-in-1 cable to switch back to Mobile Mode.
2. Launch "Wacom Center" from the Android programs screen.
3. Select "Desktop Driver Installation", check the checkbox for "Show virtual
Desktop Driver CD".
4. Reconnect the 3-in-1 cable to switch to Desktop Mode, and look for
"Install_CCH".
3. Double click the
Asterix_QSG_WEG.indb 5
Install_CCH , will appear. Open the virtual CD and click on
" "
Install tablet , and follow on-screen instructions.
" "
(Macintosh). Follow the instructions
"
EN
5
6/19/2013 10:49:24 AM