Electrolux E9WHMIC1 Bedienungsanleitung Seite 8

8
7. Following the movement shown in the picture, when attaching the filter body to the
wall support, you will hear the a "click" as the body is correctly attached to the wall
IN
OUT
DRAIN WM
5. Take the hoses, the collars and the filter
body.
Insert the collars on the hoses and connect
pipes to the filter body following IN/OUT
indications present on the back of the filter
body:
IN: hose which comes from the WM,
OUT: hose (present in the filter package)
which goes to the drain.
WARNING!
Before connecting the
drainage hose to the external
filter, be sure that the washing
machine is turned OFF and
unplugged from the electrical
socket.
6. Tighten the collars using the
screwdriver.
Follow these instructions exactly in order to
position the collars to ensure a complete
connection.
When using the screwdriver,
be careful not to damage the
filter body or the hoses.
support.