Control Panel Layout - K&H IN-6804 Gebrauchsanleitung

To avoid permanently damaging the glass-ceramic top, do not use:
Pots with bottoms that are not perfectly flat.
Metal pots with enamelled bottom.

CONTROL PANEL LAYOUT

Switching the hob On/Off
To switch the hob on, press the
press the same button until the displays switch off. All the cooking zones are deactivated
If the hob has been in use, the residual heat indicator "H" remains lit until the cooking zones have cooled
down.
If within 120 seconds of switching on, no heating zone is selected, the hob switches off automatically.
Switching on and adjusting cooking zones
Once the hob is switched on and the pan is positioned on the chosen cooking zone, select the
zone using the corresponding button: the display shows level 0.
Each cooking zone has various power levels, adjustable with the
/ /
Specifically function
Select the cooking zone you wish, and press the same number level button twice; the point
corresponding display shows . The cooking zone will work high level . Push the number level again,
Then the cooking zone will recover to previous level.
Booster
•
Switching on/off: Press the POWER/9 button twice in succession
•
The booster function only works on one cooking zone per side
Deactivation of cooking zones
Select the cooking zone you wish to switch off. Press the corresponding button.
Press the key " " to set the level to "0". The cooking zone switches off and the residual heat indicator "H"
lights up.
Child lock
This function locks the controls to prevent accidental switching on of the hob. To activate the
child lock function, switch on the hob and hold button
Then the control panel is locked.
To deactivate the control panel lock, repeat the activation procedure. The Lo goes off and the hob is active
again.
All manuals and user guides at all-guides.com
/ / / / /
button and the cooking zone displays light up. To switch off,
/ buttons, going from "1": min. level, to "9": max. level.
16
for three seconds; the timer shows Lo.