Dynamic Label Plus; Setting Drc; Deleting Inactive Stations; Sorting The Stations - TechniSat DIGITRADIO 650 Bedienungsanleitung

Stations with a signal strength below the required minimum signal intensity
are not transmitting a strong enough signal. If required, align the antenna as
described in section 6.2.
By pressing the INFO button several times, different information can be
scrolled through, such as station type, multiplex name, frequency, signal error
rate, data bit rate, station format, date.

13.9 Dynamic Label Plus

If supported by the programme provider, the Dynamic Label Plus service also allows, for
example, the name of the current programme or the track and artist to be displayed.

13.10 Setting DRC

The compression rate balances dynamic fluctuations and thereby any volume
variations that occur.
> Press the MENU button and select > [Volume Adjustment], to select the
desired compression rate.
> Select the compression rate using the / buttons:
DRC high
DRC low
DRC off
> Confirm by pressing OK.

13.11 Deleting inactive stations

> Press the MENU button and use  or  to select > [Delete inactive
stations].
> Confirm by pressing OK.
> Using  or , select > [Yes] and confirm by pressing OK.

13.12 Sorting the stations

> Press the MENU button and then  or  to select > [Station order].
68
Minimum signal intensity
- high compression
- low compression
- compression switched off.