Weidmuller Klippon POK EX-Serie Montagehinweis Für Den Installateur Seite 12

• Use the correct size of tool for tightening the terminal clamps
(screwdriver or spanner).
• Any cross-connected terminal assembly fitted with a jumper bar shall be mounted
and used subject to limitations given in the certification documents for that terminal.
For cross connection details see appendix 1 below.
• IECEx/ATEX Application:
The enclosures type Klippon
of IEC/EN 60079-14 and IEC/EN 60079-25. For latest information refer to the
online catalogue (terminals section) available via the Weidmüller website
(www.weidmueller.com).
12
POK may be field assembled under the conditions
®