Jinbei EF-150Bi Anleitung Seite 27

Function Description
Adjusting the Brightness
Turn the function button [12] to adjust the brightness. The brightness
range can be set between 1% and 100%, "--" means that the LED LED
continuous light is switched off.
Setting the Colour Temperature
Briefly press the function button [12]. The symbol "K" now flashes in
the display. Now you can set the colour temperature with the func-
tion button [12].
– Setting range of the colour temperature: 2,700 K – 6,500 K
Fan Control
Press and hold the light effect pause / light effect replay button |
fan switch [8], the fan switches on and the LC display shows the fan
symbol [23].
Note: After the fan has been switched off, the brightness is is auto-
matically turned back to 30% of the original brightness.
27