Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
UPGRADE
The MMS 730 include a OTA (Over The Air) upgrade opportunity. The App show if a update is available and
let you choose to install. Please follow the App instructions for installation.
Note: The OTA upgrade is only for WLan and LAN functionalities.
CONNECTING THE DEVICE TO A BLUETOOTH AUDIO SOURCE
Select Bluetooth input. If you have previously connected a Bluetooth device, the MMS 730 will
automatically attempt to re-establish a connection with this device. If this is the case, you may be
required to manually reconfirm the connection on the source device.
If a connection has not already been made or the connection cannot be re-established, the MMS 730 will
automatically activate the ‚pairing mode'. „BT" will flash on the display.
Now activate the Bluetooth mode on your source device. The MMS 730 will appear in the list of Bluetooth
devices as „MMS 730". If it is not displayed in the list, set your source device to search for Bluetooth
devices manually and make sure that the MMS 730 has been switched to the pairing mode.
Depending on the source device, you may be asked whether the password is to be accepted during the
pairing procedure. You can confirm this by simply pressing „Accept". If you are still asked for a password,
use the default passwords „0000" or „1234". If you are asked if you want to establish a connection
after pairing, please select „Yes". When the device has been paired and connected successfully the „BT"
indicator will illuminate continuously.
The MMS 730 supports the „Qualcomm ® aptX™" high quality audio transmission standard. If your
source device also supports this standard, „Qualcomm ® aptX™" will be selected automatically as the
transfer mode when establishing a Bluetooth connection.
PRESET MEMORY
The device is equipped with two independent PRESET memories for FM and DAB stations. Each memory
can store up to 40 stations.
Storing stations:
Set the desired DAB or FM stations using the TUNING buttons on the unit or via the remote control.
• Activating the FAV button on the remote control opens the memory and the desired memory location
can be selected via the +/- button. Saving occurs automatically after 5 seconds in the storage location.
• Successful storage is confirmed on the display with the appearance of STORED PRESET. In the first
line, the storage location number is played permanently before the station frequency.
Select a station from the list of stations:
Select the desired storage location via the +/- keys (by pressing briefly).
RDS (RADIO DATA SYSTEM)-FUNCTION OF THE TUNER (FM ONLY)
RDS is a system which provides information about FM stations that is broadcast together with the
station's signal. The MMS 730 can present this information (about the station, broadcast, etc.) in the
display.
The RDS information can be retrieved by repeatedly pressing the DISPLAY button (remote control) in the
following order:
• PS (Program Service Name): Displays the name of the programme.
• RT (Radio Text): Shows station information and messages.
• PTY (Program Type): Displays the type of programme.
• Time / Date
If one of these functions is not supported despite reception of an RDS signal, „N/A" will appear in the
display.
DAB FUNCTIONS OF THE TUNERS (DAB ONLY)
The DAB transmission system provides further data and information that can be accessed via the
DISPLAY button (remote control) in the following order:
• Station name
• DLS (Dynamic Label Segment): Shows station information and messages (e.g. title and artist of the
current song, news messages, other information about the current programme or station)
• Programme type (e.g. pop, news, classical)
• DAB multiplex number and frequency of the current station
• Time / Date
• Bit rate of the current audio signal
• DAB multiplex name
SERVICE AND TECHNICAL PROBLEMS
If you should encounter any technical problems, please contact your specialist dealer or
Magnat Audio-Produkte GmbH, www.magnat.de.
22
Werbung
Inhaltsverzeichnis
