Trouble Shooting - probst EASYGRIP EXG Betriebsanleitung

Maintenance and care
7.2

Trouble shooting

ERROR
The clamping-power is not big
enough, the load is slipping out
optional
( )
optional
( )
Adjustment of the gripping range
optional
( )
Property of material
Unbalanced load
Adjustment of the gripping range
optional
( )
53100392
CAUSE
•
The grippers are worn
•
The maximum load is exceed
•
The actual opening width is not
correct
•
The surface of the material is dirty or
the material is not suitable / allowed
for this device.
•
The device is not loaded
symmetrically
•
The adjustment of the gripping
range is not symmetrical.
18 / 20
REPAIR
•
Replace the grippers
•
Reduce the weight of. the load
•
Adjust the gripping range according
to the load you want to transport
•
Check the surface of the material or
ask the manufacturer, if you the
material is allowed for this device.
•
Adjust the position of the load
•
Correct the adjustment of the
gripping range
GB