Black & Decker kw800 Handbuch Seite 26

ENGLISH
The use of other than genuine Black & Decker
accessories and parts may damage or reduce the
performance of your Black & Decker product and
may also endanger the user. The terms and
conditions of the warranty may also be effected.
OUR AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should
be totally satisfied with their Black & Decker product
and after sales service, but if help or advice is needed
please contact your local Black & Decker authorised
repair agent who will be happy to help. Full details of
our after sales service and a list of these agents can be
found on the Internet at www.2helpU.com. Alternatively,
call our Service and Information Centre whose number
you will find towards the back of this manual.
ACCESSORIES
The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get the
very best from your Black & Decker tool.
For full details of accessories available, please
consult your nearest stockist or service agent.
TECHNICAL DATA
The level of sound pressure of the tool is in accordance
with EEC legislation. It is recommended that you take
appropriate measures for the protection of your hearing
if the sound level seems uncomfortable.
KW800
Volts (V) ~ 230
Input power (W) 710
No load speed/min 30,000
The Black & Decker policy is one of continuous improve-
ment to our product and as such we reserve the right
to change the product specification without prior notice.
Note: This user manual may also cover more than one
catalogue number within this product group. Refer to
your rating plate for details of your product. Your
product includes some or all of these features.
FEATURES
1. On/off switch
2. Electronic speed switch (KW800E)
3. Spindle lock
4. Collet nut
5. Plunge lock lever
26
KW800_E ML p24-41
6. Triple depth stop
7. Depth stop bar
8. Allen wrench (for removing motor pack from frame)
9. Wing screw
10. Vacuum adaptor
11. Template guide
12. Edge guide
13. Centring pin
14. Copy follower
15. Distance plate
2
5
3
KW800E
10
230
800
8,000-30,000
15
OPERATING YOUR ROUTER
• Insert the desired cutter into the collet.
• Set the required depth of cut.
• Set the guide fence for the position of cut.
• Set the on/off switch to 'I'.
• Plunge your router down and lock.
• Route the workpiece.
• Release the plunge lock.
• Set the on/off switch to 'O'.
26
•
•
•
•
1
7
•
•
•
18-01-2001, 09:09
8
•
•
•
•
• 6
12
•
•
13
•