WAGNER W 550 Handbuch Seite 19

W 550
4. Careful Handling and Use of Power Tools
a) Do not overload the tool. Use the power tool designed for the work that
you are doing. You work better and safer in the specified performance range if
you use the suitable power tool.
b) Do not use power tools whose switch is defective. A power tool that cannot
be switched on or off is dangerous and has to be repaired.
c) Remove the plug from the socket before carrying out tool settings,
changing accessories or putting the tool away. This precautionary measure
prevents unintentional starting of the tool.
d) Store unused power tools so that they are inaccessible to children. Do
not let persons use the tool who are not familiar with it or who have not
read these instructions. Power tools are dangerous when they are used by
inexperienced persons.
e) Take proper care of your tools. Check whether the moving parts function
trouble-free and do not jam, whether parts are broken or damaged so that
the tool function is impaired. Have damaged parts repaired before using
the tool. Many accidents have their origin in power tools that have been
maintained badly.
f) Keep the cutting tools sharp and clean. Cutting tools maintained with care
and with sharp cutting edges jam less often and are easier to use.
g) Use the power tool, accessories, insert tools, etc. in accordance with
these instructions and in a fashion specified for this special tool type.
Take the working conditions and the activity to be carried out into
consideration. The use of power tools for purposes other than the intended
ones can lead to dangerous situations.
5. Service
a) Have your tool repaired only by qualified specialist personnel and only
with original spare parts. This ensures that the tool safety is maintained.
GB
13