Blade Replacement; Robot Disposal; Declaration Of Conformity - Stiga Autoclip 527S Bedienungsanleitung

1.
Stop the robot safely (see "Robot Safety Stop").
EN
Important
Use protective gloves to prevent injuries to your hands.
2.
Turn the robot over and position it so as not to ruin the covering hood.
3.
Unscrew the screws (B) to remove the blade (A).
4.
Insert a new blade and fasten the screws.
5.
Turn the robot back over to its operating position.
•
Do not throw any polluting materials into the environment. Please dispose of the device according to the applicable laws.
•
In reference to the WEEE Directive (Waste of Electrical and Electronic Equipment), during the phasing out of the machine, the user must
separate the electrical and electronic components and dispose of them in special authorised waste collection centres, or take them back to
the retailer when purchasing a new one.
•
All the parts, which must be collected separately or disposed of in a specifi c manner, are marked with a special label.
•
Unauthorised disposal of Waste of Electric and Electronic Equipment (WEEE) is punishable with sanctions regulated by the laws in force in
the country where the infraction took place.
Danger - Attention
Waste of Electric and Electronic Equipment may contain hazardous substances having potentially harmful effects on the
environment and on the health of people. It is recommended to dispose of this waste in the correct manner.
EC DECLARATION OF CONFORMITY
Hereby declares under their full responsibility that the products, models 2L2DE0, 2L2EV0, 2L2EL0, 2L2LL conform to the following European
standards:
Safety: CEI EN (50338: 2007-06) - (60335-1: 2008-07)
Electromagnetic Compatibility: CEI EN (55014-1: 2008 -01) - (55014-2: 1998 -10) - (55014-2/A1: 2002 -08) - (55014-2/A2: 2008 -12) CEI EN (61000-3-2:
2007-04) - (61000-3-3: 1997-06) - (61000-3-3/A1: 2002-05).
It meets the essential requirements of the following directives: :
Low Voltage Directive 2006/95/CE - Electromagnetic Compatibility 2004/108/CE – Noise Emission according to Machinery Directive 2006/42/CE
User's manual

BLADE REPLACEMENT

ROBOT DISPOSAL

ZUCCHETTI Centro Sistemi S.p.A. Via Lungarno 305/A Terranuova B.ni (AR) ITALY
Bernini Fabrizio - Terranuova B.ni 01/10/2012
(CEO)
32
blade (A)
screws (B)