Cleaning And Maintenance - BRAYER BR1503 Sicherheitshinweise Und Bedienungsanleitung

(26) with the sockets in the body of the Meat Grinder
Head (23), cap it with the Nut (27) and secure it by
screwing it in clockwise.
Notes:
- fine plate is suitable for both raw and boiled meat,
fish, and etc.;
- large plate is suitable for raw meat, vegetables,
dried fruit, cheese, fish, and etc.
• Install the Food Tray (22) onto the bell of the Meat
Grinder Head (23).
• Do not use anything other than the Stomper (21)
during operation (fig. 7).
• The Bowl (7) can be utilized to store processed
foods.
• Insert the power plug into the mains socket.
• Turn on the Kitchen Machine by using the Operation
Mode Switch (4) and set it to the necessary operation
speed. Optimal operation speeds are between «3»
and «6».
• Once you are finished, set the Operation Mode
Switch (4) to «0» and unplug the appliance from the
mains.
• To disassemble the Meat Grinder Attachment,
unscrew the Nut (27) by turning it counter-clockwise
- you can use the Key (28) to unscrew the Nut (27)
- remove the installed Plate (26), the Cutting Blade
(25), and the Auger (24).
• To remove the Meat Grinder Head (23), rotate it
clockwise and extract it.
• Reinstall the Cover (11), unless the Cover (11) has
not been reinstalled, the Kitchen Machine will not
turn on.
• Wash the parts (21, 22, 23, 24, 25, 26, 27) with warm
water and a neutral detergent, rinse, and let them dry.
• The Plates (26) and the Cutting Blade (25) can be
stored inside the Stomper (21). Open the Cover (20),
put the Plates (26) and the Blade (25) inside the
Stomper, close the Cover (20).

CLEANING AND MAINTENANCE

• After using the kitchen machine, turn it off by turning
the operation mode switch knob (4) to the «0»
position and disconnect the power plug from the
electrical outlet.
• Wash the used attachment (12, 13, 14), the lid (8)
and the bowl (7) with warm water and a neutral
detergent, rinse and dry.
• To pre-wash the Blender Bowl (17), after using the
Blender Attachment, pour some water into the Bowl
(17) and turn the Kitchen Machine on, using the
pulse mode, for which purpose set the Operation
Mode Switch to «Р» and hold it down. Then, remove
the Bowl (17), wash it thoroughly, making sure to be
careful, as the cutting edges of the Rotating Blades
(19) are sharp and can be dangerous.
• After using the Meat Grinder Attachment,
disassemble it, wash the parts (21, 22, 23, 24, 25,
26, 27), rinse, and let them dry.
EN 13