Specifications - Sony KLH-W32 Bedienungsanleitung

Specifications

Video processing
Panel system a-Si TFT Active Matrix LCD Panel
Display resolution 1,366 dots (horizontal) × 768 lines
(vertical)
Sampling rate 13.5 MHz to 140 MHz
Color system NTSC, PAL, SECAM, NTSC4.43,
PAL-M, PAL-N, PAL60
Input signal See page 30.
Pixel pitch 0.510 (horizontal) × 0.510 (vertical) mm
1 1
( / ×
50
Picture size 698 (horizontal) × 392 (vertical) mm
1
(27 / × 15
2
Panel size 32-inch (diagonal 801 mm)
Inputs and Outputs
HD15 (RGB/COMPONENT IN)
D-sub 15-pin (female) (× 1) (See
page 32.)
AUDIO (COMMON AUDIO IN)
Stereo mini jack (× 1)
500 mVrms, high impedance
HDMI 1/HDMI 2 IN HDMI (compliant with HDMI
specifications 1.1)
General
Power requirements
100 V to 240 V AC, 50/60 Hz, 1.3 A
Power consumption
120 W
Speaker output
10 W + 10 W (8 ohms)
Adequate load impedance, 8 to 16 ohms
Operating conditions
Temperature: 0
°F
(32 to 95
Humidity: 20% to 90%
(no condensation)
Storing/transporting conditions
Temperature: –10
°F
(14 to 104
Humidity: 20% to 90%
(no condensation)
/ inches)
50
1
/ inches)
2
°C °C
to 35
°F
)
°C °C
to +40
°F
)
Dimensions 798 × 581 × 220 mm
1
(31 / × 22
2
(w/h/d, excluding projections)
Mass 16.6 kg (36 lb 10 oz)
Supplied accessories
AC power cord (1)
Remote Control RM-FW001 (1)
Size AA (R6) batteries (2)
Cable holder (1)
Operating instructions (1)
Optional accessories
Optional adaptors for system expansion,
BKM-FW series
Safety regulations
UL 60950-1, CSA No. 60950-1-03 (c-UL),
FCC Class B, IC Class B,
EN 60950-1 (NEMKO), CE, C-Tick
Design and specifications are subject to change
without notice.
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
7 3
/ × 8 / inches)
8 4
31
GB
GB