Output Connector Pin Specifi Cations; Cable Specifi Cations; Head Cable; Extension Connection Cables - Magnescale RS97-1024NGZ Serie Bedienungsanleitung

9-2. Output Connector Pin Specifi cations

Connector pin no.
1
2
3
4
5
6
7
8

9-3. Cable Specifi cations

Note
• Do not cut or extend the head cable and extension connection cables. Doing so will void any guarantee
of the unit's functions and performance.
• Th e connectors for both the head cable and extension connection cables (made by SIEMENS) are made
of metal. Handle them carefully since they may dent or damage the stator or rotor if they knock hard
against these parts.

9-3-1. Head Cable

Cable length
Extension
Connector

9-3-2. Extension Connection Cables

Prepare the extension connection cable (sold separately).
Extension can be done up to a total length of 30 m and a maximum of two cables.
AS for the cable length and detailed specifi cations, contact SIEMENS.
Connection Example 1
Rotary magnescale
Connection Example 2
Rotary magnescale
14
(E)
Name
+24 V
NC
RX_P
RX_N
0 V
TX_N
TX_P
NC
1 m / 2 m / 3 m
Extension up to a total length of 30 m enabled using extension connection cables (made by
SIEMENS)
M12 connector model name (male): SACC-M12MS-8Q SH (made by PHOENIX CONTACT Inc.)
connection cables
Head Cable
Head Cable
Extension Extension
connection cables
30
Extension
connection cables
30
The controller
that supports
the SIEMENS DRIVE-CLiQ
The controller
that supports
the SIEMENS DRIVE-CLiQ
RS97-1024NGZ Series