Herunterladen Inhalt Inhalt Diese Seite drucken

BRAYER BR2007 Sicherheitshinweise Und Gebrauchsanleitungen Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

  • DEUTSCH, seite 11
upper frying plate reaches the preset temperature
- the light indicator (10) «DOWN» will go out,
when the lower frying plate reaches the preset
temperature
- the indicator (9, 10) will periodically light up and go
out, indicating that the preset temperature of the
frying plates (7) is maintained.
• After approximately 6-8 minutes switch the grill off by
setting the operation mode switch (11, 12) knob to
the position «OFF», unplug the grill and wait until it
cools down completely. Take the handle (3), open the
grill and remove the remaining vegetable oil from the
frying plates (7) with a paper towel.
• The grill is ready to use.
• Notes:
- when using the unit for the first time, a foreign
smell or some smoke from the heating elements
can appear — this is normal and it is not covered
by warranty.
FOOD COOKING WITH THE GRILL
• ATTENTION!
- The press grill body heats up strongly during
operation, do not touch hot surfaces marked
with «
» to avoid burns.
- Beware of steam output from the gaps between
the operating surfaces (7), do not touch and do
not place open parts of your body near the gaps
between the frying plates (7).
- Do not use the grill for cooking frozen food.
- Do not cook meat with large bones.
- Frying time depends on the products used.
- Before using the grill make sure that the tray (6)
is installed to its place.
- Do not open the grill after switching it on, the
frying plates (7) heat up faster and more even in
the closed position.
- Before eating make sure that the food is cooked
through.
- Take the products out of the press grill right after
cooking; keeping products in the operating grill
for a long time can cause their ignition.
- Never use metal objects to take the cooked food
out, as they can damage the non-stick coating
of the frying plates (7); use the kitchen tools
intended for non-stick surfaces.
• Prepare the necessary products.
• Insert the power cord plug into the mains socket, the
indicator (8) «POWER» will light up.
• Turn the upper frying plate temperature control knob
(12) and set the necessary operating mode, the
indicator (9) «UP» will light up; the indicator (9) «UP»
will go out when the temperature of the upper frying
plate reaches the preset value:
- «OFF» — grill is off
- «LOW» — low heating temperature of the upper
frying plate
- «MED» — medium heating temperature of the
upper frying plate
EN
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis