Package Content; Getting Start - BALDR B0340WST2H2R-V7 Bedienungsanleitung

●
White backlight lasts for 20 seconds
● Stable and storable mental stand
Following contents are included in the package:
1 x Weather Station Main Unit
1 x Remote Sensor
1 x User Manual
BALDR recommends high quality alkaline or lithium batteries for
the best product performance. Heavy duty or rechargeable
batteries are not recommended.
MAIN UNIT INSTALLATION
1. Remove the battery compartment cover;
2. Insert 3x AAA battery matching the polarity(+and-) ;
3. Take the metal stand out of the compartment and install it on the
back of the unit.
SENSOR INSTALLATION
1. Remove the battery compartment cover;
2. Insert 2 x AA batteries in each sensor matching the polarity (+and-);
3. Replace the battery cover.
SENSOR SETUP
●
Switch the Channel 1-2-3 of the senor to any channel you want.
For example, you can set to Channel 1 for the sensor. But please
ensure the main unit are set to the same channel before synchro-
nization. Special note: Press " CH/▲" button on the main unit to
set the channel. The setting order is CH1--CH2--CH3-- Channel
scan(from CH1 to CH2 to CH3, 10 seconds intervals),you must
select the same number choices for both the sensor and the
main unit in order to synchronize.
●
Power the main unit prior to load the battery of sensor.

PACKAGE CONTENT

GETTING START

6