Personal Safety Requirements; Protective Equipment; Accident Prevention; Function Control - probst FTZ-MAXI-25 Betriebsanleitung

Safety
2.5

Personal safety requirements

Each operator must have read and understood the operating instructions (and all safety instructions).
Only qualified, authorized personal is allowed to operate the device and all devices which are connected
(lifting device/carrier).
The manual guiding is only allowed for devices with handles.
2.6

Protective equipment

The protective equipment must consist, according to the safety regulations
of the following parts:
2.7

Accident prevention

•
The workplace has to be covered for unauthorized persons, especially children.
•
Take care in case of thunderstorm!
•
The workplace must be sufficiently illuminated.
•
Take care with handling wet, dirty and not solidified components.
•
The working with the device in case of atmospheric editions under 3° C(37,5° F) is forbidden!
Because the goods could be fall down caused by dampness or freezing.
2.8

Function Control

2.8.1

General

•
Before every usage of the device check the functions and the working condition.
•
Maintenance and lubrication are only permitted when device is shut down!
•
Do not use the device, until all faults which can cause safety hazards are removed.
•
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using it.
•
The operating instructions must be available at the workplace every time.
•
Do not remove the type plate of the machine.
•
Unrecognisable information signs (such as regulatory or prohibition signs) must be replaced.
53100344
V3
6 / 18
•
Protective clothing
•
Safety gloves
•
Safety shoes
GB