Weighing; Weigh And Add - Silvercrest HG00496A Bedienungs- Und Sicherheitshinweise

Note:
– If the units of weight are set to metric (g) then the
units of volume will be automatically shown as ml.
– If the units of weight are set to imperial (lb:oz)
then the units of volume will be automatically
shown as fl'oz.
– The standard unit of weight is g.

Weighing

Q
Note: The kitchen scale
0:0.0 lb:oz / if the On / Off / Zero button
17 20
is pressed. If you place the weighing bowl
to the kitchen scale
2
also start from 0 g / 0:0.0 lb:oz
If you place the weighing bowl
scale after it has been switched on, then the dis-
2
play will show the weight of the weighing bowl
Press the On / Off / Zero button
the display to 0 g / 0:0.0 lb:oz
P lace the kitchen scale on a solid, flat surface.
P ress the On / Off / Zero button
on the kitchen scale
5
W ait until the LC display
on 0 g , 0:0.0 lb:oz
17
or 0 ml or 0.0 fl'oz
18
which will be the mode the
kitchen scale was in when
it was last switched off.
P ress the mode setting
button to set the kitchen
3
scale to the normal weigh-
ing mode .
23
I f necessary select the units
of weight in advance by
pressing the g / lb:oz unit
conversion button
9
the bottom of the kitchen scale before you start
weighing.
W hen you have selected the units of weight press
and hold down the On / Off / Zero button
for 3 seconds to switch off the kitchen scale
always starts from 0 g /
2
on
1
before switching on, it will
/ .
17 20
on the kitchen
1
once to reset
5
/ .
17 20
to switch
5
.
2
stops and stabilizes
4
20
,
19
on
S tand the kitchen scale
surface. Place the weighing bowl
weighing platform
P ress the On / Off / Zero button
the kitchen scale in the normal weighing mode.
W ait until all the segments of the LC display
have illuminated and the kitchen scale has
stabilized at 0 g
P lace the substance to be weighed into the
weighing bowl
The LC display
stance in the weighing bowl in the selected unit
of weight.
5
Note: The kitchen scale works without the weighing
bowl in the same way. Simply follow and repeat
1
the above steps without the weighing bowl
.
1

Weigh and add

Q
The kitchen scale
secutive weighings without emptying the weighing
bowl between weighings.
1
P lace the weighing bowl
platform
6
P ress the On / Off / Zero button
on the kitchen scale
W ait until the LC display
es on 0 g
17
0.0 fl'oz
19
scale was in when it was last switched off.
P ress the mode button
weighing mode
P lace the substance to be weighed into the
weighing bowl
The LC display
substance placed in the weighing bowl.
P ress the On / Off / Zero button
reads „T" (TARE)
Y ou can add further substances into the weighing
bowl in the same way and pressing the On / Off /
Zero button
C ontinue in this way only until the maximum
capacity of the kitchen scale
the weighing bowl
5
.
2
Getting started
on a hard, flat table
2
1
.
6
5
, 0:0.0 lb:oz
17 20
to start the weighing process.
1
shows the weight of the sub-
4
allows you to carry out con-
2
on the weighing
1
.
5
.
2
stops and stabiliz-
4
, 0:0.0 lb:oz or 0 ml
20
, which will be the mode the kitchen
to set the scale to
3
(preset to g or lb:oz).
23
to start the weighing process.
1
shows the weight of the first
4
the scale now
5
.
26
between each new substance.
5
is reached or
2
is full.
1
on the
to switch on
4
.
.
1
to switch
or
18
GB 9