Connecting Wires To Terminals - JVC KW-M560BT Kurzanleitung

Ñ

Connecting wires to terminals

Light Blue/Yellow (Steering remote control wire)
To steering remote
To use the steering wheel remote control feature,
you need an exclusive remote adapter (not
supplied) matched to your car.
Light Green (Parking sensor wire)
Accessory 3: Parking Extention cable
Connect to the vehicle's
parking brake detection
switch harness.
Connect to vehicle's
reverse lamp harness
when using the
optional rear view
camera.
Connector A
Connector B
ISO Connector
USB maximum power supply current :
[1]
DC 5 V = 1.5 A
[2] Sold separately
For best safety, be sure
to connect the parking
sensor.
Purple/White (Reverse
sensor wire)
1 3 5 7
2 4 6 8
1 3 5 7
2 4 6 8
Fuse (15A)
REAR OUT
CAM IN
Connect to vehicle's steering remote harness.
Contact your JVC dealer for details.
ST REMOTE
Bright Green/Red
INPUT 1
ST REMOTE
Purple/Red
INPUT 2
ST REMOTE
Gray/Red
GND
USB terminal (1.0 m)
[1]
5V = 1.5A
Subwoofer Preout
FM/AM antenna
1 2 3 4
AV-IN (1; Left audio, 2; Composite video,
3; Ground, 4; Right audio).
Rear Audio Preout
(Left; White, Right; Red)
FRONT OUT
Front Audio Preout
(Left; White, Right; Red)
Visual Output (Yellow)
VIDEO OUT
Rear view camera input (Yellow)
Connection/Installation
USB device
[2]
Cap
SUB
WOOFER
Cap
Accessory 1:
Bluetooth Microphone
English
25