Troubleshooting Table - Pelgrim OVM824MAT Bedienungsanleitung

TROUBLESHOOTING TABLE

Problem/error
There is no response of
the sensors; the display is
frozen.
The main fuse in your home
trips often.
The oven lighting does not
work.
The pastry is underdone.
Error code is displayed:
ERRXX ...
* XX denotes the number/
code of the error.
If the problems persist despite observing the advice above, call
an authorized service technician. Repair or any warranty claim
resulting from incorrect connection or use of the appliance shall
not be covered by the warranty. In this case, the user will cover the
cost of repair.
38
Solution
Disconnect the appliance from the power mains for a few
minutes (undo the fuse or switch off the main switch);
then, reconnect the appliance and switch it on.
Call a service technician.
The process of changing the light bulb is described in the
chapter Cleaning and Maintenance.
Did you choose the right temperature and heating
system?
Is the oven door closed?
There is an error in the electronic module operation.
Disconnect the appliance from the power mains for a few
minutes. Then, reconnect it and set the time of day.
If the error is still indicated, call a service technician.
Before the repair, disconnect the appliance from the power mains
(by removing the fuse or by removing the plug from the wall
outlet).