Gude GS 300 P Originalbetriebsanleitung Seite 10

3. Mount the sliding handle extension to the bottom
part of the rod using wing bolts.
4. Slip the upper part of the rod on the sliding
handle extension and fasten it using wing bolts.
5. Fold up the grass catcher and hook it on the
guide pulley.
GS 350 #95116 REEL MOWER
1. Press slightly the bottom part of the rod towards
yourself and let it snap in the pins on the reel
mower. See picture 2a.
2. Insert washers and fasten the rod to the reel
mower using nuts.
3. Fasten the sliding handle extension to the
bottom part of the rod using wing bolts.
4. Slip the upper part of the rod on the sliding
handle extension and fasten it using wing bolts.
5. Fold up the grass catcher, fasten the middle
brace using wing nuts, slip chain on the rear
brace and hang it to loops on the grass catcher.
6. Hang the grass catcher on the guide pulley.
Hang the chain to the bottom part of the rod in
the required height using a snap ring.
Operation
Right cutting
To have a well-kept lawn, we recommend cutting grass at
regular weekly intervals if possible. Grass thickens by
frequent cutting. If the grass has not been cut for a long
time, cutting should first take place in one direction with
the highest cutting height and then across with the
required cutting height. The maximum length of blades is
12 cm to be able to be cut by the reel mower. Cut only dry
grass if possible as wet grass does not provide fine
cutting.
Cutting height setting
GS 300 P #06000 REEL MOWER
1. Release the side adjusting screws and set the
required cutting height and then fix the screws
again.
GS 350 #95116 REEL MOWER
1. Pull the height setting lever, read the cutting
height on the scale and release the lever.
2. Repeat the procedure on the other side.
EU DECLARATION OF CONFOMITY
We,
Güde GmbH & Co. KG
Birkichstrasse 6
D-74549 Wolpertshausen
Germany
herewith declare that the following appliance complies with
the appropriate basic safety and healthy requirements of
the EU Directives based on its design and type, as brought
into circulation by us.
In case of alternation of the machine, not adreed upon
by us, this declaration will lose its validity.
Machine description:
GS 300 P #06000 REEL MOWER
GS 350 #95116 REEL MOWER
Article No.
#06000
#95116
Applicable EU Directives:
2006/42 EG
Date/authorised signature:
Title of signatory:
Technical documentation:
Warranty
The warranty applies exclusively to material defects or
manufacturing defects. Original purchase voucher with the
purchase date must be provided for lodging a claim in the
warranty period. The warranty does not cover any
unauthorised use such as appliance overload, violent use,
damage by a foreign person or foreign item. Failure to
follow the Operating Instructions or assembly instructions
and ordinary wear and tear are also excluded from the
warranty.
Residual risks and protective measures
Other risks
Risk Description
Thrown-away Thrown-away
items foreign items
may cause
injuries.
Ergonomic principles neglecting
Risk Description
Inadequate Inadequate
local lighting lighting/poor
visibility
represents a
high safety risk.
Behaviour in case of emergency
Provide necessary first aid treatment corresponding to the
injury nature and seek qualified medical help as soon as
possible.
Protect the injured person from other injuries and calm
him/her down.
First aid kit must always be available in the place of
your work in case of accident in accordance with DIN
13164. Material taken out of the first aid kit needs to be
supplemented right away.
If help is needed, please provide the following details:
1. Place of accident
2. Accident nature
3. Number of injured persons
4. Injury type
Disposal
The disposal instructions are based on icons placed on the
appliance or its package. The description of the meanings
can be found in the "Marking" chapter.
Transport container disposal
The container protects the appliance against damage
during transport. Container materials are usually selected
depending on their environment friendliness and disposal
method and can therefore be recycled.
Returning the container back in the circulation saves raw
materials and reduces waste disposal costs.
10
8 Dec, 2010
Managing Director
Mr Arnold
J. Bürkle FBL; QS
Protective measure(s)
Wear appropriate working
clothes: safety shoes,
working gloves and protective
glasses
Protective measure(s)
Provide adequate lighting or
good visibility whenever
working with the appliance.