Muting The Alarm - Vestfrost BBR150 Bedienungsanleitung

32 Vestfrostsolutions�com
"P1" Regulating probe TR3 failure
"P2" EVP Probe Failure
"P3" Logging probe TL1 failure
"P4" Logging probe TL2 failure
TR3 High Alarm
"HA1"
TR3 Low Alarm
"LA1"
"HA3" High temperature alarm probe TL1
"LA3" Low temperature alarm probe TL1
"HA4" High temperature alarm probe TL2
Low temperature alarm probe TL2
"LA4"
Door Open Alarm
"dA"
"EA" External Alarm
"CA" Serious Alarm
"Real Time Clock Error" �
NOTE: Not all probes are present in all appliances.
Alarms at start up
When the unit is started up the first time the alarm will sound/show until the unit has reached the
upper temperature alarm limit� This can take several hours�
It is possible to mute the alarm for 30 minutes� See below explanation�

Muting the alarm

When an alarm occurs any button on the display can be pushed to mute the alarm for 30 minutes�
The alarm will still be visible at the display and the red LED will continue to flash�
Alarm output ON; Compressor output accord-
ing to parameters Con and CoF
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Alarm output ON; Other outputs unchanged
Compressor and fans depend on "rrd"
Output unchanged
All outputs OFF
Please set the date and time�
EN