Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8 Operation
8.1
Switching the appliance on
In order to switch on the appliance push the mains plug into the socket.
8.2 Setting the temperature
The temperature can be set at from 0°C to 10°C with
slotted screwdriver can be adjusted.
The setting is made via the rotary knob.
Our recommendation is about 4°C.
This corresponds to a setting with the numbering 3-4 .
NOTE
Please note that the temperature will change depending on the ambient
temperature (installation site), the frequency of opening the door and the
contents.
Please note the best-before date of the products.
IMPORTANT
High room temperatures (e.g. on hot summer days) and a cold temperature
setting can lead to continuous refrigerator operation. The reason for this is
that the compressor has to run continuously in order to maintain the low
temperature in the appliance. In this case, the appliance is not able to defrost
automatically since this is only possible when the compressor is not running
(see defrosting section). Therefore, a thick layer of frost or ice may form on
the rear interior wall.
40
Werbung
Inhaltsverzeichnis
