Intended Use; Operation; Safety; Initial Use - Bosch+Sohn boso bosotherm 1600 Gebrauchsanweisung

• The electronic components in the controller warm up when the
heating pad is in use. For this reason, the controller must never be
covered or placed on the heating pad when it is in use.
• Always observe the notes on operation (section 4), cleaning and
maintenance (section 5) and storage (section 6).
• If you should have any questions about using our devices, please
contact Customer Services.

3. Intended use

CAUTION
This heating pad is only designed to warm up the human body.
The exclusive shape of this heating pad was developed specifically for use on the shoulders and neck.
Position the heating pad on the shoulders and pull the ends over the chest. The magnetic catch keeps the pad
in place. For a tighter fit, the poppers can be used. To undo, simply pull the ends apart or release the poppers.

4. Operation

4.1 Safety

CAUTION
• The heating pad is fitted with a SAFETY SYSTEM. This sensor technology provides protection against
overheating across the entire surface of the heating pad with an automatic switch-off in the event
of a fault. If the SAFETY SYSTEM has switched off the heating pad, the temperature settings are no
longer illuminated when switched on.
• Please note that for safety reasons, the heating pad can no longer be operated after a fault has oc-
curred and must be sent to the specified service address.
• Do not connect the defective heat pad with another controller of the same type. This would trigger
a permanent switch-off via the controller safety system.

4.2 Initial use

CAUTION
Ensure that the heating pad will not bunch up or become folded during use.
• First, connect the controller to the heating pad by inserting the plug-in coupling.
• Then plug the mains plug into the socket.

4.3 Switching on

To switch the heating pad on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2 or 3.
The temperature settings (4) are illuminated when switched on.

4.4 Setting the temperature

Level 0: OFF
Level 1: minimum heat
Level 2: medium heat
Level 3: maximum heat
NOTE
• The fastest way to warm up the heating pad is to initially set the highest temperature setting.
12