Reflexion DVD1017 Bedienungsanleitung Seite 40

USB-PLAYBACK-FORMATS
32kbps – 320kbps
MP3
Bis 8000 x 6000 Pixel
JPEG
Dateigröße bis 8MB
MPEG-1 (ISO/IEC 11172-2)
MPEG MPEG-2 (ISO/IEC 13818-2)
MPEG-4 ASP (XVID)
Bis 720 x 576 Pixel
AVI
720 x 480i, 720 x 576i,
VOB (DVD)
720 x 480p, 720 x 576p
Errors and technical changes reserved.
DEVICE-SPECIFICATIONS
ELECTRONIC PARAMETERS
Power supply:
Power consumption:
Humidity during operation:
Output Video output:
Voltage
Audio output:
Errors and technical changes reserved.
SYSTEM
Laser:
Signal system:
Frequency range:
Signal-to-noise-ratio:
Dynamic range:
Errors and technical changes reserved.
AC 100-240V, 50/60Hz
<10W
5% bis 90%
1Vp-p(75Ω)
1,2 Vrms (1KHz, 0dB)
Semiconductor laser, wavelength
650nm
NTSC, PAL
20Hz bis 20KHz (1dB)
More then 80dB (Only analog
output sockets)
More then 85dB (DVD/CD)
TECHNICAL-PARAMETER
TUNER Frequency
range
RF Input level
IF Bandwidth
Modulation
VIDEO Decoder Format
Output Format
Output Port
Note: Design and specifications are subject to change without notice.
BATTERY-PARAMETERS
Battery specifications
Charging time: 3-4 hours
Bearings and operating conditions:
1. Storage Temperatur
6 Month -20°C to +45°C
1 Week -20°C to +65°C
2. Storage Temperatur
Load 0°C to +/-45°C
Unloaded -20°C to +65°C
Charge the battery
To charge the built-in battery, plug the power adapter into the device
and into the power outlet. The LED charging indicator starts to flash
green. When the charging process is completed, the charge indicator
lights up in a steady green. The charging process can take about 3-4
hours.
Note:
The duration of the charging process depends on whether the device
is charged in the switched-off state during use.
170~230MHz
470~860MHz
-79db´Bm (T), -75dBm (T2)
7MHz und 8MHz
QPSK, 16QAM, 64QAM,
128QAM (T2), 256QAM (T2)
MPEG4 AVC / H.264 HP@4
HEVC / H.265 HT@L4
MPEG2 MP@ML.HL
480i, 480p, 576i, 576p, 720p,
7080i, 1080p, 4,3 und 16:9
HDMI
:
Battery Voltage: 7,4V
Humidity
65+/-20%
65+/-20%
Humidity
65+/-20%
65+/-20%