1.Fix the left panel (2) and the right
panel (3) to the back panel (1) with
screws.
4. Install 2 foot stands (6) to the bottom
panel (7).
7. Install the locking bar (8) into the
right panel (3), and insert the lower part
of the locking bar into the right panel.
2.Fix the inner frame (4) to the left and
right panels (2 and 3) with screws.
5. Install the assembled bottom panel
(7) to the the left panel (2) and the right
panel (3), and fix them with screws.
8. Install the left and
right slide ways (D and
E) to the left and right
panels (2 and 3)
respectively, and
install the pulleys (J).
E Right X2
D Left X2
05
www.costway.com
3. Install the top panel (5) from top to
bottom, and fix it to the left and right
panels (2 and 3) with screws.
6. Install 4 castors (B) to the left panel
(2) and the right panel (3), and then
tighten them with a wrench.
9. As shown in the figure,
disassemble the left and
right slide rails (F and G)
respectively.