Continuous Drainage - G21 Impact 40 Anleitung

• Place both hands respectively at the side of the back cover side of the depression, gently
remove the water tank and open the tank cover on the right side of the body, then pour the
water from the gap between water tank and the cover.
• Close the tank cover and rotate the water tank handle down, then put the water tank gently
back in to restart the appliance.
Attention: when the water tank is full of water, please empty it. Before putting the water tank into
the dehumidifier, please confirm whether the floater rotates flexibly or not, then put it in position
using both hands.

Continuous drainage

If you don't want to drain water from the water tank frequently, you can connect a drainage pipe:
When the pump funtion is off
• a. Connect a drainage pipe (with outer diameter 13 mm) on the back of this dehumidifier.
• b. Find a garden hose with standard thread with 26,98 mm outer diameter and 11,5 TPI
pitch
When the pump function is on
• Connect a drainage pipe (with inner diameter 5 mm) on the back of this dehumidifer (the
suggested drainage height is no more than 5 m).
Note:
• With water-containing plate clean function. If won't use
it for a long time, také down the water cover and clean
the dehumidifer.
• Before také down the water cover, use a cup to hold
water to avoid leakage.
2
1