Mounting The Hood - KKT KOLBE Trio series Benutzerhandbuch

Mounting the hood

10. Mounting the hood
• Place the mounting bracket for the
hood body on the wall at the desired
position, mark the position of the
screw holes and drill 3 holes ø 8mm at
the marked positions.
• Fix the bracket to the wall using the
screws (4x30mm) and dowels sup-
plied.
boreholes
dowels
mounting
bracket
• Raise the hood body and attach it to
the wall bracket.
• Open the glass flap and remove the
aluminium grease filter.
screws
• Mark the two holes in the rear side
of the hood on the wall.
• Take the hood down again and drill
ø 8 mm holes at the marked points.
• Hang up the hood body again and
fix the rear side to the wall using the
screws and dowels supplied.
39