Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.5 InTouch
The extraction hood has the InTouch function. If you
have an induction hob from Novy with InTouch, you can
operate the extraction hood from the hob. There is also
the option that the extraction hood can be operated with
a remote control.
Programming InTouch on the induction plate
The remote control must fi rst work with the hood. If ne-
cessary, the remote control code can be changed, as
described in Section 2.5
− Connect the plate to the mains supply.
− Touch simultaneously the keys
plate until you hear a beep signal (prox. 7 sec.).
− The cooker plate now searches automatically for the
hood code.
− Wait until the cooker hood illumination begins to fl ashing
OR you hear a "click" sound when you have an extractor
hood without lighting (Be patient, this can betake a while).
− Does the light blink or you hear the "click" sound; press
immediately on any InTouch key or
on the induction hob.
− You will hear a "beep" signal to indicate the link between
the two devices.
Now you can operate the hood with the keys on the
induction plate.
You can fi nd more information about using the InTouch
functions in the InTouch manual for the hob or remote control.
Turning the InTouch function on and off
The InTouch function is on by default. Turning
off the InTouch function on the cooker hood
results in the connection between cooker hood
and Novy induction hob with InTouch and/or
remote control is also disabled
To switch the InTouch function off press the
keys at the same time for 3 seconds and the 2nd and 4th
LEDs fl ash 3 times to confi rm. (The appliance must be
switched off).
switched off).
The function can be switched on by pressing the
keys at the same time for 3 seconds.
3
The 2nd and 3rd LEDs fl ash 3 times to confi rm (the appli-
ance must be switched off).
and
on the induction
or
or
or
1
and
2
1
and
– 37 –
3 CLEANING AND MAINTENANCE
Follow all instructions as described in the Con-
ditions for Safety and Use section.
Follow the cleaning instructions below for a
longer working life and optimal operation of the
appliance.
The bottom panel, grease fi lter and recircula-
tion fi lter can fall out when you are handling
them. This can result in damage. Make sure you
hold the bottom panel and the fi lter(s) securely
at all times when handling them.
WARNING! Risk of injury! Open and close the
bottom panel slowly. Use a stable stepladder
and pay attention to stability. Do not step on the
hob or the worktop surface.
3.1 General maintenance
Allow the lighting to cool down suffi ciently
before you start cleaning the extractor hood.
Never use aggressive, abrasive or chlorinated
products.
Do not use a high pressure or steam cleaner.
Stainless steel
Clean with a cleansing tissue with mild cleaning agent
then dry with a soft cloth. Maintenance of the stainless
steel can be performed with the Novy cleaner (906060).
Coated parts of the extractor hood
The extractor hood can be cleaned with a damp cleansing
tissue and a mild cleaning agent.
Glass
Glass parts of the extractor hood can be cleaned with
a soft cloth and a glass cleaner.
Werbung
Inhaltsverzeichnis
