Electrolux GA60LVCN Benutzerinformation Seite 9

The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water in
Water hardness
1) Factory setting.
2) Do not use salt at this level.
If you use multi-tablets containing salt and
the hardness of your water is lower than
21dH, you can set the lowest water
softener level. It deactivates the salt refill
indicator.
If you use standard detergent or
multi-tablets without salt, set the
proper water hardness level to keep
the salt refill indicator active.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press
Downloaded from www.Manualslib.com
German de- French de-
grees (°dH) grees (°fH)
47 - 50 84 - 90
43 - 46 76 - 83
37 - 42 65 - 75
29 - 36 51 - 64
23 - 28 40 - 50
19 - 22 33 - 39
15 - 18 26 - 32
11 - 14 19 - 25
4 - 10 7 - 18
<4 <7
hold simultaneously
the indicators , ,
start to flash and the display is blank.
.
• The indicators ,
off.
manuals search engine
your area. It is important to set the right
level of the water softener to assure good
washing results.
mmol/l
8.4 - 9.0
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
• The indicator
• The display shows the current
3. Press
the setting.
4. Press the on/off button to confirm the
setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and until
and level 6 (maximum quantity). Level 0
and
will deactivate the rinse aid dispenser and
no rinse aid will be released.
Factory setting: level 4.
and go
ENGLISH
Clarke de- Water softener
grees level
58 - 63 10
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
5
18 - 22
13 - 17
5 - 12
< 5
1
continues to
flash.
setting: e.g. = level 5.
again and again to change
9
9
8
7
6
1)
4
3
2
2)