The obligations stipulated in the supply agreement, our general terms and conditions of business, the manu-
facturer's terms and conditions of supply and the statutory regulations in force at the time of contract conclu-
sion apply.
1.5. COPYRIGHT
The contents of these instructions are protected by copyright. They may be used in connection with the
operation of the system. Any other use above and beyond the aforementioned is only permitted with the
EN
written consent of the manufacturer.
1.6. SPARE PARTS
WARNING!
•
Risk of injury from using incorrect spare parts!
•
The use of incorrect or defective spare parts can result in risks for the operating staff and in damages,
malfunctions or total failure of the system.
•
Only use original spare parts from the manufacturer or spare parts authorized by the manufacturer.
•
Always consult the manufacturer if in doubt.
LOSS OF WARRANTY
•
The manufacturer's warranty lapses if unauthorized spare parts are used.
1.7. WARRANTY PROVISION
The warranty provisions are included in the manufacturer's general terms and conditions of business. See
chapter VI. Warranty Claims.
1.8. CUSTOMER SERVICE
GCE GmbH
Weyherser Weg 8
DE-36043 Fulda
Please do not hesitate to provide us with information and experiences gained through use; we welcome any
valuable input that will help to improve our products.
2. SAFETY
This section provides an overview of all the important safety aspects to ensure the protection of your staff
and the safe and trouble-free operation of the equipment. Further safety information relating to specific tasks
can be found in the sections on the individual life cycle phases.
2.1. INTENDED USE
The manifold is only usable for the defined standard gases and pressures observing the given temperature
range. The maximum flow is 20 m
Intended use also includes compliance with all the information in these instructions and compliance with
reparation, maintenance working, type label and data sheets.
Any use other than, or above and beyond, the intended use constitutes improper use.
WARNING!
•
Danger from improper use!
•
Improper use of the system can lead to dangerous situations.
•
Never use the manifold with liquid fluids.
2.1.1. STRUCTURAL CHANGES AT THE MANIFOLD
Without written approval of supplier no extensions, additions or alternations are allowed on the manifold.
Components which are not in perfect condition have to be changed immediately.
/h.
3
8/72