Part Designations - SHE SHE23TI2001 Bedienungsanleitung

1. Front safety guard
2. Fan blade
3. Threaded nut
4. Rear safety guard
5. Motor shaft
6. Motor housing
7. Oscillation button
1. Remove the threaded nut (3) from the motor shaft (5) and put it to the side.
2. Put the rear safety guard (4) on the motor shaft (5).
3. Put the threaded nut (3) back on to secure the rear safety guard (4).
4. After that slide the fan blade (2) onto the motor shaft (5) in such a way that it locks
into the designated notch.
5. Install the vane (11) on the front safety guard (1) with the supplied screws (12).
6. Put the front safety guard (1) on the rear safety guard (4) by placing the upper hook of
the front safety guard onto the rear safety guard. Make sure the opening for the
fastening screw (10) points down and that it is flush with the opening on the rear
safety guard.
7. Now fasten the two safety guards by closing all clamps followed by tightening the
fastening screw (13).
1. Place the fan on dry and level ground.
2. Plug it into a standard 220-240V outlet.

PART DESIGNATIONS

8. Stay
9. Operating panel
10. Base
11. Vane
12. screws
13. Fastening screw
ASSEMBLY INSTRUCTIONS
STARTUP
Seite 10 von 12