Inhaltsverzeichnis
Werbung
• To reactivate (unlock) the Remote Control,
P
press and hold
until the following
screen appears.
2. To increase or decrease the stimulation
level of all programmed therapy areas,
press either p or q from the Level
screen.
3. To change the stimulation level of just
one area:
Note: Only applicable if your Stimulator is
programmed to treat more than one
area and to operate at frequencies of
1,200Hz or below.
General Instructions
a) From the Level screen, press
many times as necessary to find the
desired area by name or number.
b) Press p or q to make the change.
4. To activate a stimulation program:
P
a) Press
from the Level screen.
b) From the Program screen press
many times as necessary to highlight
the desired program.
c) Press p to activate the selected
program.
90877454-04 REV A Page 3 of 72
as
"
P
as
Precision™ Remote Control
3
Werbung
Inhaltsverzeichnis
